When players keep shouting,LED belt will light up gradually. When players stop shouting, LED belt will extinguish gradually. When the whole stripe of LED belt lights up, the 12v EM lock will release.
1. User can revise game audio by TF card in the controller.
2. User can revise the length of LED belt. (one to two strips of LED belt can be chosen)
3. User can revise the time of lighting up one strip of LED belt via TF card. ( 15 seconds or 20 seconds can be chosen)
When gets power supply, LED belt will flash white light. System will play audio to remind that device will enter into game mode in 70 seconds.
When players enter room in 70 seconds, the human body detect sensor will detect players. Then system will play audio to remind players that device has been activated.
Players will know they need to shout at decibel receiver loudly through previous clues. When they shout, LED belt will light gradually.
When players stop shouting, LED belt will extinguish gradually. (Any other sound can replace shout, as long as the sound is loud enough. The decibel of sound should be higher than our daily speaking. For example, players can play music to replace shout.)Players need to shout continuously for 15 seconds to light the whole strip of LED belt to red. ( The time of lighting up one strip of LED belt can be revised as 15 seconds or 20 seconds). LED belt will turn to blue after flashing blue light three times. Then 12v EM lock will release with audio.
How to reset?
Power off and restart after triggering successfully.One controller connected with a decibel receiver