【30】Video player-metal buttons

Prop name: Video player - metal button version

Brief introduction

Press a metal button to play a video (or picture or audio). Players can find clues from the video.

After the device is powered on, the system initializes for 3-5 seconds. After the initialization, the system will switch to the home screen. The default home screen is black picture, Users can change. When button 1 is triggered, play the corresponding 01.avi (or mp4 format) video or 01.jpg picture under the SD card, and so on. 8 buttons correspond to 8 video files.

About Usage

How to reset?

The video will stop automatically after playing, press the button again to play again.

How to connect the line?

Configuration process

The home screen file is 99.jpg by default in SD card. If you need to change the home screen file, replace the file with the original name. If you need to set the home screen as the video, please contact us inadvance.

Prop list

One controller with N metal buttons (N=1~8)

One 12v power supply

*Users need to prepare monitor and monitor power supply

FAQ

1. How long are the cables that go to the button? How far away can the metal buttons be?

The length between button and controller is one half meters, and this part don’t support extend.

2. When the game starts, what appears on the screen? Can it at least shows some sort of graphic or a loop of something or is the just "OFF" until the button 1 is pressed?

When the prop connected well and get power supply, there be a background picture shows on the computer screen. The default picture is a black screen, while user can revise this background picture of your own.



Manual to old version



Prop name: Video player-four metal buttons

Brief introduction

There are four metal buttons, when adventurers find the first button, and press it and will get a short video clue.

When they press the second button, they will get the second video clues. Each metal buttons correspondence to a video.

Get all this four video clues, then figure out the puzzle, a password or something important.

How to reset?

Press the button again to play again.

How to connect the lines?

The controller connects with the 12v power supply. The VGA interface connects the computer display. The audio wiring connects the speaker.

(Do not include VGA interface display, USB flash drive or SD card and speaker)



Prop list

Part 1.One controller with four metal buttons

Part 2.One 12v power supply

Owner can revise video contents of your own.

How to connect with 12V electromagnetic lock?

The red wire of the controller should be connected to the red wire of the magnet lock.

The black wire of the controller should be connected to the black wire of the magnet lock.

How to revise it to AVI format?

1Open the format software factory.

2Choose AVI format .

3) Add the video file into software.

4) Output setting. Video player's file must keep AVI format.

Size limit: AVI

Video size: 640*480

Bitrate(kb/s): 1024

FPS: 24

Aspect ratio: 4:3

5). At last,

you need to click on"start" began to transform and wait for the processing; an d for the download files.

FLD0: Screen pictures folder, user can replace it. (600*800, jpg)

FLD1-FLD5: the video file

folder, the files we have just transformed to replace is ok. Delete the original file and replaced with yours new one

FAQ

1. How long are the cables that go to the button? How far away can the metal buttons be?

The length between button and controller is one half meters, and this part don’t support extend.

2. When the game starts, what appears on the screen? Can it at least shows some sort of graphic or a loop of something or is the just "OFF" until the button 1 is pressed?

When the prop connected well and get power supply, there be a background picture shows on the computer screen. The default picture is a black screen, while user can revise this background picture of your own.

3. After "button one" video is played, does it return back to "OFF" until button two is played, or does it go back to what it originally was showing?

Normally, when adventurers press the first button. It will play the related video , after playing over, the computer will back to initial screen. The default setting is a black screen shows on the computer.



share :