【60】Six Sliders prop

Product Name: Six sliders

Brief introduction

Players need to adjust the six sliders to right position to unlock.

About usage

How to reset?

There are only the no-audio version and two reset ways for this prop, users cant change it.

1. Adjust any slider to the wrong position to reset after triggering successfully.

2. Re-power the controller to reset after triggering successfully.

How to set the password?

1. Power off the controller.

2. Adjust all the six sliders to the position which you want to set.

3. Keep touching the red button and power on the prop. You can let go of your hand when you hear 2 beeps.

4. System will save the positions as triggered ones automatically after you hear 6 beeps.

Product highlights

1. Every slider has six gears.

2. User can set the position of sliders of their own.

3. User can define the sliders of their own.

Prop list

One black panel with six sliders

One 12v power supply





Manual to old version



Product Name: Six Sliders prop


Brief introduction

Adventurers should adjust the six sliders to the correct positions, then a 12v EM lock will release.


Details introduction

①Adventurers would find six sliders in the room.

②Room owner should set some clues to tell adventurers how to adjust these six sliders. Each slider has six gears which can be defined by room owners, such as pressure, temperature, speed or anything they want.

③Adventurers need to adjust the six sliders to the correct positions, then a 12v EM lock will release after 2 seconds.

④Nothing will happen when anyone of the sliders at the wrong position.

How to reset?

Adjust anyone of the sliders to the wrong position to reset.

Product highlights

1. This kind of sliders is very common in any kinds of rooms. Room owners can define the sliders of their own, such as pressure, temperature, speed or anything else fits for their rooms.

2. Each slider has six gears and the triggered position can be revised.

3. When all the sliders are adjusted to the right position, there are 2 seconds before the lock release. This can be a protection to prevent adventurers trigger it inadvertently.

Prop list

One black panel with six sliders

One 12v power supply

Tips: The plug of the power supply is Chinese standard.

If it doesn't match your country's power standard,

please tell us and we can provide an extra power conversion plug for you.

How to set the triggered position of sliders?

①Power off the controller .

②Adjust all the six sliders to the position which you want to set.

③Keep touching the red button and power on the prop. You can let go of your hand when you hear 2 beeps.

④System will save the positions as triggered ones automatically after you hear 6 beeps.

How to connect with 12V electromagnet lock?

The red wire of the controller should be connected to the red wire of the magnet lock.

The black wire of the controller should be connected to the black wire of the magnet lock.

share :