【166】Energy Bar-Lattice Screen Series

Product name: Energy Bar

Brief introduction

The 12V EM lock will release with audio when the energy bar is filled.

Version introduction

Touch sensor version: the energy bar will rise up gradually if all the touch sensors are touched at the same time. The 12V EM lock will release with audio when the energy bar is filled.

Knock sensor version: the energy bar will rise up gradually if all the knock sensors are knocked at the same time. The 12V EM lock will release with audio when the energy bar is filled.

Press button version: the energy bar will rise up gradually if all the buttons   are pressed at the same time. The 12V EM lock will release with audio when the energy bar is filled.

Blow sensor version: the energy bar will rise up gradually if all the blowing sensors are blew at the same time. The 12V EM lock will release with audio when the energy bar is filled.

Warm tip: if any button or sensor is stopped being triggered, the energy bar will go down. Players need to keep triggering the buttons or sensors continuously till the bar is filled.

About usage

How to reset?

There are two reset ways. Room owner can revise it via micro SD card in the controller.

Option 1: It will reset automatically in 30 seconds after being triggered successfully.

Option 2: re-power to reset.

How to set the game time of filling in the energy bar?

1. Power off the controller.

2. Keep holding the set button on the controller and get 12v power supply to the controller. Please let go of your hand when you hear prompt tone.

3. Please press the set button to set the game time after the prompt tone. If you want to trigger the sensors or buttons 10 seconds to fill in the energy, please press the button 10 times. The time will show on the energy bar when you set it.

4. Please wait for 10 seconds after configuration, system will save the time automatically.

Warm tip: the time can be set from 1 seconds to 60 seconds.

Product highlights

1. Room owner can revise the game audio via micro SD.

2. Room owner can set the game time from 1 second to 60 seconds.

3. Room owner can revise the color of energy bar via micro SD. There are 3 colors: red, green and yellow.

Prop list

One controller

One 12V power supply

One lattice screen

N sensors or buttons

How to connect 12V EM lock?

The red wire of the controller should be connected to the red wire of the magnet lock. The black wire of the controller should be connected to the black wire of the magnet lock.

How to change audio files?

Owners can change audio files via SD card in the controller.

Attention: please make a copy of the original sound files in your computer in case of wrong operation.

1.Sound file must be MP3 format. Just changing the suffix of the file directly is invalid.

2.The path cannot be changed, if you revise sound files from 01 folder, then you put it back to 01 folder rather than other folder.

3.File names cannot be changed, keep the file name same as original.

More details, please check the video via this link:

https://www.youtube.com/watch?v=bgWvqwqJGGo

Audio configuration

share :