【215】Face Identification System

Product Name:Face Identification System

Brief introduction

The prop will be triggered when it identifies human face.

The prop has two versions.

Standard version: There is a camera on the prop. When the prop identifies human face via the camera, the screen will show a success picture or video.

Metal button trigger version: There is metal button. Players need to press the metalbutton firstly to activate the prop. Then human face can be identified successfully, the screen will show a success picture or video. If the button is not pressed, the system will show a failure picture or video when the prop identities human face.

Note:

1. The success and failure interfaces can be changed.

2. Also, a light or an EM lock will be triggered if they are connected to the relay on the prop.

About Usages

How to reset ?

There are two reset ways. Room owner can revise it by TF card in the controller.

Option 1: It will reset automatically in 30 seconds after being triggered successfully.

Option 2: Power off and repower to reset.

How to revise the prop via TF card ?

1. Take out of the TF card from controller, connect it to computer.

2. The folder in the TF card is 1987. You will find a folder which names system under 1987 folder. There are two folders and one file under system.

3. Change Reset way: if there is a txt file named as reset, the reset way is auto-reset way. If the file is deleted, the reset way is power off and repower.

4. Change success or failure picture: if you want to get a picture when trigger the prop, please add two pictures to the picture folder. The name of success picture must be succ. The name of failure picture must be fail. The format must be jpg or png.

5. Change success or failure video: if you want to get a picture when trigger the prop, please add two pictures to the video folder. The name of success video must be succ. The name of failure video must be fail. The format must be mp4.

Note: if picture and video both exist, the prop will play video.

Product highlights

1. Room owner can revise the picture or video by TF card in the controller.

2. Room owner can choose the reset way.

Prop list

One camera

One smart screen

One controller

One 5v power supply

One HDMI cable

One USB cable

How to connect wires?

人脸识别_08.jpg



share :