【107】Radio prop

Product Name: Radio prop

Brief introduction

Players need to adjust the channel of radio to the right one. Then they will get the audio clue.


Details introduction

1. When gets 12V power supply on,the indicator light will flash 3 times. Interference device will show a channel for 18 seconds then it will disappear. The display time of channel is the same as audio(file 001 in 02 folder) playback time.Room owner needs to turn on the radio in advance.  

2. Players will see a radio under normal circumstances playing local radio station after they enter the room. They need to find a metal object through the puzzles.

3. When players take metal object close to the metal sensor, radio frequency interference device will be activated and show a channel on its small screen. The indicator light is lit up at the same time.

4. Players need to adjust the channel of radio to the designated radio band on the small screen.

For examplethe radio channel which room owner set in advance is 90.4, players need to adjust the channel of radio to 90.4. Then radio begins to play the audio clues which room owner set in advance.

5.The radio returned to play local radio station after the audio is over. And                  indicator light will be off. If players want to hear the audio clue again, they need   to take metal object close to the metal sensor again.

About usage

How to reset?

Take metal object close to the metal sensor again.

How to set the channel?

1. Repower the prop.

2. Press “+” or“-”on interference device as soon as possible to adjust channel after the indicator flashes 3 times.

3. Wait for some seconds after adjusting. It will save the channel.

Product highlights

1. User can adjust the radio channel.

2. User can revise the audios via the SD card.

Prop list

One controller with indicator light

One metal sensor (sensing range for metal sensor is 0-8MM)

One interference device

One 12V power supply


How to change audio files?

Owners can change audio files via SD card in the controller.

Attention: please make a copy of the original sound files in your computer in case of wrong operation.

1.Sound file must be MP3 format. Just changing the suffix of the file directly is invalid.

2.The path cannot be changed, if you revise sound files from 01 folder, then you put it back to 01 folder rather than other folder.

3.File names cannot be changed, keep the file name same as original.

More details, please check the video via this link:

https://www.youtube.com/watch?v=bgWvqwqJGGo


FAQ

Q: After powering on the device, why did the interference device just flash than extinguish?

A: The interference device is not in working condition after powering on the device. Players need to trigger it with metal object. Then it will enter into work mode.



Manual to old version


Product Name: Radio prop

Brief introduction

In order to get a sound clues, players need to use metal object to trigger metal sensor. Then they will figure out the radio channel from interference device. They need to adjust the channel of radio to the right one. Then they will get the audio clue.

Details introduction

1. When gets 12V power supply on,the indicator light will flash 3 times. Interference device will show a channel for 18 seconds then it will disappear. The display time of channel is the same as audio(file 001 in 02 folder) playback time.Room owner needs to turn on the radio in advance.  

2.Players will see a radio under normal circumstances playing local radio station after they enter the room. They need to find a metal object through the puzzles.

3. When players take metal object close to the metal sensor, radio frequency interference device will be activated and show a channel on its small screen. The indicator light is lit up at the same time.

4. Players need to adjust the channel of radio to the designated radio band on thesmall screen. For examplethe   radio   channel   which   room   owner   set   in advance is 90.4, players need to adjust the channel of radio to 90.4.   Then radio begins to play the audio clues which room owner set in advance.

5.The radio returned to play local radio station after the audio is over. And                  indicator light will be off. If players want to hear the audio clue again, they need   to take metal object close to the metal sensor again.

How to reset?

Take metal object close to the metal sensor again.

Product highlights

1. User can adjust the radio channel

2. User can revise the sound files through the TF card

Prop list

One controller with indicator light

One metal sensor (sensing range for metal sensor is 0-8MM)

One interference device

One 12V adapter

How to set the channel?

1. Power on the prop.

2.Press “+” or“-”on interference device as soon as possible to adjust channel after the indicator flashes 3 times.

3. Wait for some seconds after adjusting. It will save the channel.

FAQ

Q: After powering on the device, why did the interference device just flash than extinguish?

A: The interference device is not in working condition after powering on the device. Players need to trigger it with metal object. Then it will enter into work mode.

Audio configuration

share :