【131】Object induct sensor

Product name: Object induct sensor

Brief introduction

Players need to keep object in front of the object sensor for a period of time, one lock will release with audio.

About usage

How to reset?

Wait for 30 seconds to set automatically.

How to set the time?

1. Power off the prop.

2. Keep holding the set button in the controller to power on the prop. You can let of your hand when you hear the voice tips.

3. You can put the object to close the object sensor for a period of time, then wait for 10 seconds to save the configuration automatically.

4. The tiem supports 0.5 second to 10 minutes.

Remarks

1. The round head of the sensor should be exposed when packing.

2. It is suggested that the sensing object should be a relatively flat object, such as book, hand, etc., the smooth bottom position of the side wall of the can is not very effective.

Prop list

One controller

One object sensor

One 12v power supply

How to connect with 12V electromagnetic lock?

The red wire of the controller should be connected to the red wire of the magnet lock.

The black wire of the controller should be connected to the black wire of the magnet lock.

How to change audio files?

Owners can change audio files via SD card in the controller.

Attention: please make a copy of the original sound files in your computer in case of wrong operation.

1.Sound file must be MP3 format. Just changing the suffix of the file directly is invalid.

2.The path cannot be changed, if you revise sound files from 01 folder, then you put it back to 01 folder rather than other folder.

3.File names cannot be changed, keep the file name same as original.

More details, please check the video via this link:

https://www.youtube.com/watch?v=bgWvqwqJGGo


share :