【5】LED belt-knock knock version

Product Name: LED belt-knock knock version

Brief introduction

When players knock the vibration sensor for a certain time, they will see that the LED belt lights up gradually . When the whole belt is being lit up, one lock will be released.

About usage

How to reset?

There are 2 methods to reset. Users can revise via SD card in the controller.

1) After triggering successfully, wait 30 seconds to reset.

2) After triggering successfully, re-power to reset.

How to set the time of knocking the vibration sensor?

1. Power off the controller.

2. Keep holding the set button and power on the controller.

3. Please dont let go your hand until you heard the sound tip.

4. After setting, the system will save configuration automatically in 10 seconds. (The knocking time can't be more than 30 seconds.)

Product highlights

1. Users can change the game audio of their own.

2. Users can adjust the reset method of their own.

3. Users can revised the color of LED belt of their own.

4. Users can choose the number of LED belt of their own.

5. Users can set the time of knock the sensor of their own.

Prop list

One controller

One vibration sensor

One LED belt: 5 meters in length

(You can install the vibration sensor on door or desk, so that the adventurers just knock the door or desk is okay)

One 12v power supply

How to change audio files?

Owners can change audio files via SD card in the controller.

Attention: please make a copy of the original sound files in your computer in case of wrong operation.

1.Sound file must be MP3 format. Just changing the suffix of the file directly is invalid.

2.The path cannot be changed, if you revise sound files from 01 folder, then you put it back to 01 folder rather than other folder.

3.File names cannot be changed, keep the file name same as original.

More details, please check the video via this link:


How to connect with 12V electromagnet lock?

The red wire of the controller should be connected to the red wire of the magnet lock.

The black wire of the controller should be connected to the black wire of the magnet lock.

share :