【8】Single RFID Card prop

Prop name: Single RFID Card

Brief introduction

Adventurers need to find a IC card or any object which hiding an IC card in and put it to the specified position(card reader). Then one lock will be released.

About Usages

How to play? (Sensing range)

Small IC card: 1-2CM

Big IC card: 2-3CM



How to reset?

There are 4 reset methods can be chosen. Users can revise it via SD card in the controller.

1). After triggered successfully, wait 30 seconds to reset.

2). After triggering successfully, sweep card again to reset.

3). After triggering successfully, take the card away to reset.

4). After triggering successfully, re-power to reset.

Product Highlight

1. Users can revise the game audio of their own.

2. Users can adjust the reset mode of their own.

3. Users can configure the card to solve the problem of card loss.

Prop list

One set of RFID card: a round card and a square card

One resetting card

One controller

One card reader

One 12v power supply

How to change audio files?

Owners can change audio files via SD card in the controller.

Attention: please make a copy of the original sound files in your computer in case of wrong operation.

1.Sound file must be MP3 format. Just changing the suffix of the file directly is invalid.

2.The path cannot be changed, if you revise sound files from 01 folder, then you put it back to 01 folder rather than other folder.

3.File names cannot be changed, keep the file name same as original.

More details, please check the video via this link:

https://www.youtube.com/watch?v=bgWvqwqJGGo



How to connect with 12V electromagnet lock?

The red wire of the controller should be connected to the red wire of the magnet lock.

The black wire of the controller should be connected to the black wire of the magnet lock.


--------------The manual to old version-------------

Prop name: Single lC Card/One IC card

Brief introduction

Adventurers will find an IC card or any kinds of objects which hiding an IC card in it. During figure out some puzzles,adventurers will be told to put the IC card or the object to the specified position. Then one lock will release for them.

How to reset?

Auto reset version:

After triggered successfully, this prop will be reset in 30 secondsautomatically.


Single reset version:

Use the reset card to reset.



Product Highlight

1. This prop is a quite simple one in the room escape games. But it can be decorated into thousands of puzzles.

2. The IC card is small and thin, so it’s quite easy to be hidden in any kinds of objects.

3. It’s simple, while it’s stable and reliable.


Sensing range

Small IC card: 1-2cm

Big IC card: 2-3cm



Prop list

One set of IC card: a big size and a small size


One resetting card (Only included by single version)


One controller

One 12v power supply

Version introduction:

①Normally closed version: When put IC cards onto green reader, one 12v EM lock will release.

Prop reset when IC card away from green reader.

②Normally open version: When put IC card onto the green reader, the 12v lock will get worked, get closed.

Take this IC card away ( Ic card can be decorated in photos or anything which is not metallic), then 12v lock release.

③Auto reset version: When IC card being placed on green reader; 12v lock will release.

After triggered successfully,   this prop will be reset within 30 seconds automatically.

④Single reset version: When IC card being placed on green reader ; 12v lock will release ;   Use the reset card to reset.


How to connect with 12V electromagnet lock?

The red wire of the controller should be connected to the red wire of the magnet lock.

The black wire of the controller should be connected to the black wire of the magnet lock.

share :