Each metal sensor corresponds to a relay. If players use metal object touch the metal sensors, the corresponding relays will be triggered. When players touch all the metal sensors with metal object in right sequence, a 12V EM lock will release with audio.
Each metal sensor corresponds to a relay. If players use metal object touch the metal sensors, the corresponding relays will be triggered. When players touch all the metal sensors at same time, a 12V EM lock will release with audio.
How to reset ?
There are 3 reset ways, room owner can revise it by TF card in the controller.
Option 1: The prop will reset automatically in 30 seconds after being triggered successfully.
Option 2: repower to reset
A. Sequence version: enter right password again to reset
B. Simultaneous Version: take away any metal object from metal sensor to reset
How to set the sequence and activate the metal sensors?
1. Power off the controller.
2. Keep holding the set button on the controller and power on the prop.
3. Please let go of your hand when you hear prompt tone.
4. A. Sequence version: Use metal object to touch the metal sensor in the sequence that you want.
B. Simultaneous Version: Use metal object to activate all the metal sensors one by one.
5. Please wait for 10 seconds, system will save the configuration automatically.
1. Room owner can revise the game audio by TF card in the controller.
2. Room owner can set the sequence for sequence version.
3. Room owner can connect 12V EM lock or 12V light for each metal sensor.
N metal sensors
One 12v power supply