【1】Stand still prop

Product Name: Stand still prop

Brief introduction

Adventurers need to stand still (without any even slight movement) for a fixed time to unlock (the time can be set by users from 5 seconds to 120 seconds).

About usage

How to play?

1. When power on the device, system will play an audio to remind that it will enter into game mode in 70 seconds.

2. When the adventurers enter the room, the human sensor will detect them. The equipment will be triggered to start game. It will play an audio at the same time. It can give players some clue(sound file can be revised by users )

3. They must stand still(without any even slight movement) for a fixed time(the time can be set by users from 5 seconds to 120 seconds). Then the 12V EM lock will be released with audio.

4. The human sensor can be fixed on wall, roof or ceiling or other places according to your requirements.

How to reset ?

There are 2 reset options can be chosen. Users can adjust it via SD card on the controller.

1. After triggering successfully, wait 30 seconds to reset.

2. After triggering successfully, re-power to reset.

How to set the playing time ?

1. Power off the controller.

2. Keep pressing the set button on the controller and power on the controller.

Don’t let go of your hand until you hear prompt tone.

3. Then you can set the playing time.

Pressing the set button once, playing time will be set into five seconds.

Pressing the set button twice, playing time will be set into ten seconds.

…… (5 to 120 seconds can be chosen)

4. Please wait for 10 seconds after you set the playing time. System will save the playing time automatically.

Product highlights

1. Users can revise the game audio of their own via TF card in the controller.

2. Users can set the playing time of their own. (5 seconds-120 seconds).

3. Users can adjust the reset mode of their own via TF card in the controller.

4. Users can choose the number of human sensor according the size of their escape room.

Prop list

One human detect sensor

One controller

One 12v power supply

How to connect with 12V electromagnet lock?

The red wire of the controller should be connected to the red wire of the magnet lock.

The black wire of the controller should be connected to the black wire of the magnet lock.



Audio configuration



--------------Manual to old version---------------

Product Name: stand still prop

Brief introduction

When the adventurers enter the room, the human detect sensor will detect them. The equipment will be triggered to start game. They must stand still(without any even slight movement) for a fixed time(the time limit can be set by user from 5 seconds to 120 seconds). Then the 12V EM lock will release with audio.

Details introduction

1. When power on the device, system will play an audio to remind that it will               enter into game mode in 70 seconds.

2. When the adventurers enter the room, the human detect sensor will detect them. The device will be triggered to start game. It will play an audio at the same time. It can give players some clue(sound file can be revised by user )

3. Adventurers must stand still for a fixed time without any slight movement. Then the 12V EM lock will release with audio.

4. The human sensor can be fixed on wall, roof or ceiling or other places according to your requirements.

How to reset ?

There is a magnet sensor connecting to controller. Room owner just need to put a magnetic object close to the sensor to make this prop reset.

Product highlights

1. Room owner can revise the game audio by TF card in the controller.

2. The playing time limit can be set by user from 5 seconds to 120 seconds

Prop list

One human detect sensor

One magnet sensor

One controller

One 12v power supply

How to connect with 12V electromagnet lock?

The red wire of the controller should be connected to the red wire of the magnet lock.

The black wire of the controller should be connected to the black wire of the magnet lock.

20180702

How to set the playing time ?

1. Power off the controller

2. Keep pressing the red button on the controller and power on the controller.

Don’t let go of your hand until you hear prompt tone.

3. Then you can set the playing time.

Pressing the red button once, playing time will be set to five seconds.

Pressing the red button twice, playing time will be set to ten seconds.

……

(5 to 120 seconds can be chosen)

4. Please wait for ten seconds after you set the playing time. System will save the playing time automatically.

Audio configuration


FAQ

1.   Q: Can I change the game time of stand still prop? I need to set the triggered time as 20s.

     A: Yes you can change the triggered time, please refer to the manual.

2.   A: can the human detect sensor can detect the sound of players?

Q: The human detect sensor can only detect the action of players, but it is very sensitive, it can detect the movement of their mouth.

3.Q: I want to buy a more human body sensor as spare. What should I do?

   A: A single human body sensor costs $15.

4.Q: What is the magnetic sensor used to? Is it used to active the prop?

    A: The magnetic sensor is used to reset the prop.

5. Q: How to install human body induct sensor?

A: You can install the body detect sensor on the roof. Then it will detect down in 100° angles and the sensing range is 3 to 4 meters. You can also add the quantity of the sensors if you want to make the stand still area larger. 8 human detect sensors can be connected at most. The more sensors you set, the less place of hiding in your room for adventurers.




share :