【29】Cipher keyboard

Product Name: Cipher keyboard

Brief introduction

Standard version: Input correct password via the keyboard to unlock.

With ID card version: Swipe card and input correct password to unlock.

About usage

How to reset?

After triggering successfully, wait five seconds to reset.(can set time)

How to set the password? (Take 1987 as password)

Standard version:

1. Power on the device

2. Press #123456#22

3. Add your new password

4. Input# to save the password

That is #123456#221987#

With ID card version:

1. Power on the device

2. Press #123456#3

3. Swipe the ID card

4. Add your new password

5. Input# to save the password

That is #123456#3 swipe card1987#

How to delete all password?

Please input #123456#451111# to delete all passwords.

More programming guide, please check the paper manual in the box.

Product highlights

1. There are two patterns: keyboard version and touch version.

2. This prop supports two unlock modes: password and password+ID card.

3. Users can set the password of their own.

4. Users can set the time of automatic reset from 1s to 99s.

Prop list

One keyboard with one connection line

One 12v power supply

One ID cards (only password+ID card)

How to connect with 12V electromagnet lock?
The red wire of the controller should be connected to the red wire of the magnet lock.
The black wire of the controller should be connected to the black wire of the magnet lock.





Manual to old version


Product name: Cipher keyboard

Brief introduction

You can User can make some puzzle for the adventurer, when adventurers enter into the chamber room. They need to figure out the password first, and then input it via keyboard. When they enter the right password on the keyboard, the door will open.

Details introduction

There are two appearances of Keyboard can be chosen.

- Keyboard version

-Touch version

There are two versions can be chosen.

- Standard password version:

1. When players enter into the chamber room. They will found a cipher keyboard. Room escape owner can install the cipher keyboard behind the door.

2. By some puzzle clues, they need to figure out the password and input the right password via keyboard.

3. When they enter the right password on the keyboard, the door will open.

If the password is wrong, nothing happen. (The password varies from three digits to six digits).

- ID card trigger version:

There are three unlock modes can be set. ID card trigger mode, ID card or password trigger mode, ID card+password trigger mode.

We take ID card+password trigger mode as an example:

1. When players enter into the chamber room, they will found a cipher keyboard.

2. Players need to find the right ID card and use it to activate the cipher keyboard, meanwhile they need to figure out the right password by some puzzle clues, in order to release a 12V EM lock.

Warm tips:

Please enter the password + # to unlock.

For example: the password is 1987, you should enter: 1987#.


Product highlight

1) There are two appearances of Keyboard can be chosen.(Keyboard version and Touch version)

2) There are two versions can be chosen.

3) This prop supports three unlock modes. (ID card trigger mode, ID card or password trigger mode, ID card and password trigger mode).

4) Room owner can change the password/ ID card, can also set several the passwords/ ID cards.(The password should be 3-6 digits)

5) This prop is easy to stall.

6) Users can revise the reset time of your own.(from 0.2 seconds to 99 seconds)


Prop list

One keyboard with one line


Five ID cards(only password+ID card version)

One 12v power supply

TipsThe plug of the power supply is Chinese standard.

If it doesn't match your country's power standard,

please tell us and we can provide an extra power conversion plug for you.


How to reset?

After trigger successfully, wait 5 seconds to reset. Room owner can set the reset time.

How to set the reset time?

1) Enter #123456#5+new reset time+# to set the reset time:

For example, the reset time you want to set is 10 seconds , you need enter #123456#510#.

If you want to set the reset time into 0.2 seconds, you need enter #123456#500#

2) When hearing one long beep, it means you set the new reset time successfully.

How to set the unlock mode for ID card trigger version by room owner?

There are three unlock modes can be set.

01. ID card trigger mode:

02. ID card or password trigger mode:

03. ID card and password trigger mode:

1) Enter #123456#6+unlock mode+# to set the unlock mode:

      The unlock mode can be 01, 02 or 03

01 is ID card trigger mode;

02 ID card or password trigger mode;

03 ID card and password trigger mode.

For example, if you want to use ID card+password to unlock, you need enter #123456#6+03+#, that is #123456#603#.

2) When one long beep, it means you set the unlock mode successfully.

How to set/increase the password?

(Password varies from three to six digits. 3-6digits)

1)   Enter #123456#22+new password+# to set the password + ID card:

For example, the new password you want to set is 654321, you need , that is #123456#22654321#.

2)   When one long beep, it means you set the new password successfully.

3)   When the prop is get 12V power and you can enter 654321 #via the keyboard, the 12V EM lock will open.

How to set/increase the ID card?

1)   Enter #123456#1+new ID card+# to set the ID card:

2)   When one long beep, it means you set the unlock mode successfully.

How to set/increase the password + ID card?

(Password varies from three to six digits. 3-6digits)

1) Enter #123456#3+put the ID card and enter new password+# to set the password + ID card:

For example, the new password you want to set is 654321, you need , that is #123456#3 ID card 654321#.

2) When one long beep, it means you set the new password successfully.

3) When the prop is get 12V power and you can enter 654321# via the keyboard, the 12V EM lock will open.

Warm tips:

Enter #123456#400000# to remove all of the preset password/ ID card.




FAQ

Q: I have a question regarding the prop that we purchased from you a while ago see the attached manual that you sent me. How do you delete codes. I have some I want to remove that guests keep accidentally putting into it to win our game.

A: Follow this step to delete all passwords which has been set.

When get power supply for the keyboard. Press #123456#400000# to delete all passwords.

And then get restart for the prop and set new password.








share :