【14】Metal button-sequence version

Product name: Metal Button-sequence version

Brief introduction

There is a controller connected with four metal buttons. Room escape owners need to make some puzzle first, when adventures press these buttons in sequence, the lock will release with audio.

Details introduction

1). There are four metal buttons which within good texture and can be easily decorated in the room.  

2). The adventures should find the clues in the room and get the password previously. According to the password, the adventures need to press these buttons in sequence and the lock will release.

3). Repressing these buttons in sequence will reset this product. Or it will be reset when it is repowered on.

How to reset?

Repressing these buttons in sequence will reset this product. Or it will be reset when it is repowered on.


Product highlights

1). Users can set the password of their own.

2). Users can change the audios of their own. Buttons can be increased.

3). The metal buttons have better texture than the other kinds of buttons.

3). Buttons can be increased.

Prop list

Part1. One controller


Part2. Four metal buttons


Part3. One 12v power supply

How to connect with 12V electromagnetic lock?

The red wire of the controller should be connected to the red wire of the magnet lock.

The black wire of the controller should be connected to the black wire of the magnet lock.

How to set the password? (Sequence version)

1). Firstly the prop should be powered off

2). Keep holding any two of the buttons and power on this prop. Keep holding about 10 seconds, there will be voice guide. Then you can let go of your hand.

3). Following by the voice guide, press the buttons you want to set as the password and wait 10 seconds, the system will save the configuration automatically.

How to revise the audio?

1). Please make a copy of the original sound files in case of wrong operation.

Sound file must be MP3 format, directly change the suffix of the file is invalid

2). The path to the file cannot be changed, if you revise sound files from 01 file then put it back to 01 file, not other files.

3). File names cannot be changed, keep the file name same as original.



share :